Many high performance OEM engines use an in-line fuel pulse damper from the factory including the Toyota 2JZ-GTE, Nissan VQ35DE, and Subaru EJ20/EJ25. The use of an inline damper is great for applications where there is not an option for direct fuel rail mounting.
Vehicle Fitment:
Universal Product
| Part Number: | Feed Fittings: | Style: | Notes: |
| 20-0199-01 | Barb | FPD-R Green Compact | – |
| 20-0199-06 | 6AN | FPD-R Green Compact | – |
| 20-0199-08 | 8AN | FPD-R Green Compact | – |
| 20-0199-10 | 10AN | FPD-R Green Compact | Discontinued JUN 2022 |
| 20-0200-01 | Barb | FPD-XR Black Extra Range | – |
| 20-0200-06 | 6AN | FPD-XR Black Extra Range | – |
| 20-0200-08 | 8AN | FPD-XR Black Extra Range | – |
| 20-0200-10 | 10AN | FPD-XR Black Extra Range | Discontinued JUN 2022 |
Install Instructions:
Download PDF
Full Description:
The opening and closing of fuel injectors creates pressure pulses in the fuel rail which can lead to unstable fuel pressure. In order to achieve a safe and consistent rail pressure, a fuel pulse damper (FPD) is often necessary. The FPD’s internal diaphragm will absorb oscillating pulses and stabilize fuel pressure. This correction can be measured throughout the RPM range and can often help idle surge, especially with high flow injectors. Furthermore, a fuel pulse damper can help solve erratic lean air/fuel ratio spikes, commonly experienced as “stumbling”, that are difficult to tune out.
Many high performance OEM engines use an in-line fuel pulse damper from the factory including the Toyota 2JZ-GTE, Nissan VQ35DE, and Subaru EJ20/EJ25. The use of an inline damper is great for applications where there is not an option for direct fuel rail mounting.
What makes Radium FPDs unique?
Along with having the flexibility of using common fittings, Radium Engineering FPD’s use a vacuum/boost reference port which allows for proper fuel pulse damper performance even at elevated fuel pressures. This becomes essential for boosted systems that use a 1:1 rising rate fuel pressure regulator.
What is the difference between FPD-R and FPD-XR?
The FPD-R (green top) is slightly shorter than the FPD-XR (black top) allowing it to be used in space-constrained applications.
• FPD-R = Range (Green)
• FPD-XR = Extra Range (Black
Which Damper Do I Choose?
The FPD-R (Fuel Pulse Damper-Range) and FPD-XR (Fuel Pulse Damper-Extra Range) both have unique base “static” fuel pressure requirements:
• FPD-R base pressure requirement = 40 – 70psi (static)
• FPD-XR base pressure requirement = 40 – 120psi (static)
Base pressure is the fuel pressure measured when the fuel pump is running WITHOUT a vacuum line connected to the regulator.
Important Notes:
The ranges above are base static fuel pressures only. Any dynamic fuel pressure created by a rising-rate FPR outside of this range is acceptable, but only when the base “static” fuel pressure is set within these ranges and the vacuum/boost reference line is connected.
Example 1:
Vehicle: Mitsubishi EVO
OEM Base Static Fuel Pressure: 43.5psi
Boost Pressure: 30psi
Rising Rate Pressure Regulator? Yes
Can I use a FPD-R? Yes. Even though fuel pressure is 73.5psi at full boost, the FPD-R will work because the base static pressure was set within the 40-70psi requirement. However, the vacuum/boost reference line must be installed.
Can I use a FPD-XR? Yes. Also, the vacuum/boost reference line does not need to be installed since maximum fuel pressure does not exceed 120psi.
Example 2:
Vehicle: BMW E46 M3
OEM Base Static Fuel Pressure: 72.5psi
Boost Pressure: 20psi
Rising Rate Pressure Regulator? Yes
Can I use a FPD-R? No. Base static fuel pressure exceeds the 40-70psi requirement.
Can I use a FPD-XR? Yes. Also, the vacuum/boost reference line does not need to be installed since maximum fuel pressure does not exceed 120psi.
Features:
The inline kit features an anodized aluminum housing with a large 0.69″ center bore that uses two in-line inlet/outlet ports that are machined with 3/4″-16 UNF threads for 8AN ORB fittings. Depending on the size of the fuel feed hose used, there are 3 kits to choose from which include different male adapter fittings (-6AN, -8AN, -10AN). These fittings seal to the billet housing using Viton O-rings.
An 1/8″ NPT female port is threaded into the center of the fuel pulse damper. A fuel pressure gauge is commonly used here or other sensors for pressure or temperature data.
Using the supplied M6 bolts/nuts, the FPD kit can be mounted at any possible angle including upside down. For best results, the damper should be plumbed as close to the fuel rail(s) as possible. Like any fuel system part, the FPD kit should be kept away from excessive heat areas.
This product is safe for use with all fuel types including alcohol blends such as E85.
Includes:
• Anodized and Laser Engraved Aluminum Top (FPD-R or FPD-XR)
• Anodized Aluminum Body Threaded for 8AN ORB
• Anodized Aluminum ORB Adapter Fittings (6AN, 8AN or 10AN)
• Gasoline and Alcohol (E85) Resistant Diaphragm
• Stainless Steel M6 Mounting Bolts and Nuts
• Rubber Vacuum Hose (4mm ID)
• Vacuum Hose Y-Fitting
• 1/8″ NPT Plug
